How to benchmark like a pro The benchmarking process is an by minerstat minerstat

The first time you run EasyMiner, it enters ‘MoneyMaker’ mode which allows you to automatically create a paper Litecoin wallet and start mining right away with a private pool. While convenient, it’s not likely to generate high profits at the current difficulty rate. Minerstat® is the top platform for ASIC and GPU crypto mining monitoring and management. By conducting a benchmark on all algorithms and mining clients you can get a general overview on which coins are available to mine and on which algorithms is your rig performing the best.

Complex, because you also want to tweak, compare, set your own parameters, your own overclock settings, and have control over what to measure in your benchmark reports. At the same time, a benchmark is a tool that benefits both, those with a small number of rigs and those with large farms. After the benchmark finishes for the first time, we suggest to open the benchmarking profile and rerun the failed benchmarks.

This can happen if you have an overclocking profile set and this profile isn’t compatible with all algorithms in the benchmark. Similar can happen if you choose a too short benchmark duration period. In case you already know which coin and algorithm you want to mine, you might want to benchmark all mining clients available for this algorithm to find the fastest one. The reward is calculated regarding the current mining difficulty, block reward, and current price. The data is provided by CoinSRC and is gathered through official coin sources.

To use either profit switch function or mining calculator, you will need to know the hashrates your GPUs have on certain algorithms. You have two options to get these numbers – either by mining and monitoring the speeds directly or by conducting a benchmark. The latest option will certainly be easier, faster, and give you a lot of information in just a few steps. Additional features include an easy setup, with the ability to join multiple mining pools simultaneously. The hashing power, and production of each machine is tracked in real time, with a total provided of both variables.

  1. Hotkeys can be used to perform routine tasks including monitoring pools, identifying devices and enabling extra features.
  2. You can select different benchmarks and merge them into one.
  3. The goal here is centralized management, for maximum efficiency, and in turn, profitability.
  4. The only disadvantage of this software is that it is difficult to set up it for the first time.
  5. If you see that your rig is frequently crashing and your rig is already optimized, we suggest keeping an eye on the benchmark so you don’t waste time.

Do note that the first benchmark in the selected list will be merged with selected benchmarks of the same worker – you can’t merge benchmarks on different workers. The result of merging is one benchmark where the latest hashrate and power consumptions are taken into an account. When we introduced our benchmarking feature in 2019, we really thought it through and wanted to make it as easy for miners as possible. It is included in the free plan, so anyone can use it without having to upgrade the minerstat account. Furthermore, it allows different exporting options so the results can be used in different ways.


For testing purposes, you can leave the benchmark duration at fast, but note that some mining clients need more time to get the results than the others. On our testing rigs, we usually reach a 98% success rate while the average success rate for all of our customers’ benchmarks is 85%. This means that you can easily achieve an 85% success rate or more by mining benchmark tool rerunning the failed options. Some GPUs are not supported for all mining clients and all algorithms, especially if they are newer. That’s why it is better to divide benchmarks into different algorithms and test for each algorithm separately. The Benchmark process will one by one download the mining clients it needs to conduct the benchmark process.

With setup complete, MultiMiner then automatically scans for mining devices and lists their details in a helpful table, including the pool used, the profitability and average hash power. Most importantly, the client will also display your daily projected profit with your current mining hardware. CGMiner has been around for over six years and is coded in C, which makes it compatible with almost every operating system. It functions via a simple command line interface, supporting multiple mining pools and devices. It’s primarily designed to be used with dedicated hardware mining devices, but can make use of any GPUs connected to your machine as well.

His specialty on techradar is Software as a Service (SaaS) applications, covering everything from office suites to IT service tools. He is also a science fiction and fantasy author, published as Brian G Turner. Multiminer is cross-platform, but additional software is needed to get it working on macOS and Linux. MultiMiner is a graphical frontend to make BFGMiner a snap to use. As such it has plenty of powerful features, while being much kinder to newcomers. Along with offering a simple text interface and features by the ton, BFGMiner is available for Windows and all major flavors of Linux.

Config templates

This is a basic panel that allows you to control the benchmark process. Plenty of programs are available to help manage your cryptomining endeavors. In this guide, we’ll explore five of the more popular options. For more experienced computer users, a good option is to install the free operating system Linux, and make use of one of the text-only programs, for example CGminer.

Do you support mixed mining rigs (AMD & Nvidia)?

Check what to mine at the current moment with a replica of our profit switch algorithm. GUI mining software for your Windows Nvidia and AMD GPU rigs. The Fiji based GPUs such as the Nano and Fury aren’t that cost effective and as the file size increases due to their limited VRAM buffer capacity they do fall well behind the R9 390 series. When it all boils down to it the GTX 1070 looks to be king as it offers solid performance and a very high level of efficiency. The R9 390 and 390X are faster, but will consume much more power.

Not sure which software to use?

Due to this, you need to left-click on the file PG Bench.exe to relaunch the application. You can see the configuration panel with five basic tabs in the left-top corner. The only disadvantage of this software is that it is difficult to set up it for the first time.

You will get a link to public benchmark results that you can share with your friends or colleagues. You can export the benchmark as a JSON file and have all speeds ready to load to different databases. By clicking on the finished benchmark you can explore all the details and see the achieved speeds and consumptions.

Before you start, we suggest you think about which algorithms will you test out, so you can prepare all the things you need. After you have defined all of your options, Save or Save and benchmark. Your rig needs to be running when the benchmark command is sent (so don’t forget to click Start mining if you are using Windows node or have the rig turned if you are using msOS). If you missed it, you can always wait a few minutes and resend the command to benchmark by clicking Continue with benchmark.

Leave a Reply